Same TrustClarity. New revamped look!
Learn more about our new lookLoading...
We use cookies to enhance your experience, personalize content, and analyze traffic.
Cookie PolicySame TrustClarity. New revamped look!
Learn more about our new lookSlide 1 of 1
Manufacturer
Tripp Lite
MPN
PDUMH20-ISO
Available
1
Condition
New
Napwpu000102 Ac Power Strip
The Tripp Lite PDUMH20-ISO is a high-quality AC power strip designed to provide reliable and safe power distribution for your electronic devices. This power strip features 20 outlets, allowing you to connect multiple devices at once. It also has a 15-foot power cord, giving you flexibility in where you can place it.
It is equipped with an isolated power module that provides protection against power surges and spikes. It comes with mounting brackets that allow you to securely attach it to a wall or rack. The power switch is conveniently located on the front panel, allowing you to easily turn off all connected devices when not in use.
Specifications | |
INPUT | |
| Input Phase | Single-Phase |
| PDU Input Voltage | 100; 120; 125; 127 |
| Recommended Electrical Service | Single-phase 20A 100-127V service |
| Maximum Input Amps | 16 |
| Maximum Input Amps Details | Agency de-rated to 16A continuous |
| PDU Plug Type | NEMA 5-20P; NEMA L5-20P |
| Input Cord Length (ft.) | 15 |
OUTPUT | |
| Output Capacity (kW) | 2.03 |
| Output Capacity Details | 2.03kW (127V), 1.92kW (120V), 1.6kW (100V) / 16A total capacity; 16A max per 5-15/20R outlet; 12A max per 5-15R outlet |
| Frequency Compatibility | 50 / 60 Hz |
| Output Receptacles | (2) 5-15R; (12) 5-15/20R |
| Output Nominal Voltage | 100-127V |
| Overload Protection | 20A circuit breaker |
USER INTERFACE, ALERTS & CONTROLS | |
| Front Panel LCD Display | Two digit current meter reports PDU output load in amps |
| Switches | No power switch |
| LED Indicators | Set of 3 diagnostic LEDs continuously report status for LINE OK (green), suppressor or wiring FAULT (red) and PROTECTION PRESENT (green) |
SURGE / NOISE SUPPRESSION | |
| AC Suppression Joule Rating | 3840 |
| AC Suppression Response Time | NM = 0 ns. CM = <1 ns |
| Protection Modes | Includes full normal mode (H-N) and common mode (N-G / H-G) line surge suppression |
| Clamping Voltage (RMS) | 140 |
| AC Suppression Surge Current Rating | 60,000 amps |
| EMI / RFI Filtering | 40-80 dB |
| Immunity | Conforms to IEEE 587 / ANSI C62.41 |
PHYSICAL | |
| Material of Construction | Metal |
| Rack Height | 1U |
| Form Factors Supported | 1U rackmount, 0U vertical rackmount, wall-mount, and under-counter installation |
| Minimum Required Rack Depth (inches) | 9.5 |
| PDU Form Factor | Horizontal (1U) |
| Unit Dimensions (hwd / in.) | 2.000 x 20.000 x 4.500 |
| Unit Weight (lbs.) | 4.6 |
ENVIRONMENTAL | |
| Operating Temperature Range | 32° to 104°F (0° to 40°C) |
| Storage Temperature Range | -22° to 122°F (-30° to 50°C) |
| Relative Humidity | 5% to 95% non-condensing |
| Operating Elevation | 0-10000 ft. (0-3000 m) |
FEATURES & SPECIFICATIONS | |
| Grounding | Rear grounding lug |
Please refer to the following attachments for additional details on the product.
No specifications available.
