Morningstar PS-30M - 30A 12/24 V DC solar charge Cont
Slide 1 of 1
Manufacturer
Morningstar
MPN
PS-30M
Available
0
Condition
New
MORNINGSTAR ProStar 30-amp 12/24 volt DC solar charge controller with meters. Can be used with up to 30 amps of charge current in either 12 or 24 VDC.
Key Features and Benefits
PWM series battery charging (not shunt)
3-position battery select: gel, sealed or flooded
Very accurate control and measurement
Jumper to eliminate telecom noise
Parallel for up to 300 amps
Temperature compensated charging
Tropicalization
No switching or measurement in the grounded leg
100% solid state
Very low voltage drops
Current compensated low voltage disconnect (LVD)
LED’s to indicate battery status and faults
Capable of 25% overloads
Remote battery voltage sense terminals
| Mechanical Data | |
| Technology: | Pulse Width Modulation (PWM) |
| Dimensions: | 7.30 x 4.50 x 2.80 inches |
| Weight: | 1.10 lbs |
| Casing: | (Gray) |
| Display: | LED Indicator Lights |
| Parallel Wiring: | Up to 300 Amps |
| Battery Position Select: | Gel, Sealed, or Flooded (3) |
| Wire Size: | #6 AWG (16mm²) |
| Electrical Data | |
| System Voltage: | 12V or 24 Volts |
| Rated Solar/Load Current: | 30 Amps |
| Temperature Compensation (mV/°C): | -30mV at 12V, -60mV at 24V, -120mV at 48V |
| Accuracy: | 40mV at 12V, 60mV at 24V, 80mV at 48V |
| Minimum Operating Voltage: | 8V for 12V/24V, 15V for 48V |
| Self-Consumption: | 22mA at 12V, 25mA at 24V, 28mA at 48V |
| Operating Temperature: | -40°C to +60°C |
| Battery Voltage Setpoints* | Note: Values are for 12V. Use 2X for 24V and 4X for 48V. |
| Regulation Voltage: | Gel: 14.00V, Sealed: 14.15V, Flooded: 14.40V |
| Float: | 13.70V (Gel, Sealed & Flooded) |
| Equalization: | Gel: N/A, Sealed: 14.35, Flooded: 14.90/15.10V |
| Load Disconnect: | 11.40V (Gel, Sealed & Flooded) |
| Load Reconnect: | 12.60V (Gel, Sealed & Flooded) |
Please refer to the following attachments for additional details on the product.
No specifications available.