Same TrustClarity. New revamped look!
Learn more about our new lookLoading...
We use cookies to enhance your experience, personalize content, and analyze traffic.
Cookie PolicySame TrustClarity. New revamped look!
Learn more about our new lookSlide 1 of 1
Manufacturer
Generic Brand
MPN
ADCB-HFHM
Available
188
Condition
New
Generic Brand ADCB-HFHM - DC BLOCK, 4.3-10M/F
Introducing the Generic Brand ADCB-HFHM - DC BLOCK, 4.3-10M/F, a high-quality and reliable DC block design. The ADCB-HFHM DC block is specifically designed to block direct current (DC) signals while allowing radio frequency (RF) signals to pass through.
This makes it an essential component in RF systems, preventing any interference from DC signals that can affect the performance of the system.
Specifications | |
| Inner Contact Plating | Silver |
| Interface | 4.3-10 Female |
| Interface 2 | 4.3-10 Male |
| Outer Contact Plating | Trimetal |
| Pressurizable | No |
Dimensions | |
| Height | 24 mm | 0.945 in |
| Width | 24 mm | 0.945 in |
| Length | 68.1 mm | 2.681 in |
Electrical specifications | |
| 3rd Order IMD | -118 dBm |
| 3rd Order IMD Test Method | Two +43 dBm carriers |
| Insertion Loss, typical | 0.1 dB |
| Average Power | 200 W |
| Connector Impedance | 50 ohm |
| dc Test Voltage | 48 V |
| Operating Frequency Band | 555 – 2700 MHz |
| Peak Power, maximum | 2 kg/mm |
Mechanical specifications | |
| Coupling Nut Proof Torque | 5 N-m | 44.254 in lb |
| Coupling Nut Retention Force Method | IEC 61169-154 |
| Interface Durability | 100 cycles |
| Interface Durability Method | IEC 61169-154 |
| Mechanical Shock Test Method | MIL-STD-202F, Method 213B, Test Condition C |
Environmental specifications | |
| Operating Temperature | -40 °C to +65 °C (-40 °F to +149 °F) |
| Storage Temperature | -40 °C to +85 °C (-40 °F to +185 °F) |
| Attenuation, Ambient Temperature | 20 °C | 68 °F |
| Average Power, Ambient Temperature | 40 °C | 104 °F |
| Corrosion Test Method | MIL-STD-1344A, Method 1001.1, Test Condition A |
| Immersion Depth | 1 m |
| Immersion Test Mating | Mated |
| Immersion Test Method | IEC 60529:2001, IP68 |
| Moisture Resistance Test Method | MIL-STD-202F, Method 106F |
| Thermal Shock Test Method | MIL-STD-202F, Method 107G |
| Vibration Test Method | MIL-STD-202F, Method 204D, Test Condition B |
| Water Jetting Test Mating | Mated |
| Water Jetting Test Method | IEC 60529:2001, IP66 |
Please refer to the following attachments for additional details on the product.
No specifications available.
