34-units min. Cal Am 5120-07 Kwikie Blank Duct Plug, Loop Nut, 3/4 Inch 0.75 in 20Mm - 5120-07

The original Kwikie brand mechanical plug is one of Cal Am Manufacturing's most popular products. Trusted by contractors world-wide to secure their conduit systems from the costly and often damaging incursion of water sedimentation and nesting animals, these high quality plugs are manufactured from a trio of hi-impact chemically inert resins that will also confine volatile and hazardous vapors to their source. The Kwikie plug functions by compressing a thermoplastic elastomer seal between two UV, Ozone and chemically resistant compression plates through the hand tightening of a loop or wing nut; the compressed seal expanding into full contact with the inside pipe walls thereby providing an effective, permanent, positive seal to your conduit system in seconds. Once in place, the Kwikie plug will not move until you decide to remove it. All Kwikie plugs that are designed for conduit pipe larger than two inches are hollow-stemmed and may be used for feeding or bleeding fluids from your lines (1/2” hose thread adaptor available). Other options include wing nuts or eye nuts for tightening the compression plates. Flush-fit vs. inside fit (the outside compression plate on flush-fit Kwikies will not enter the conduit) and schedule 40 and schedule 80 sizing. All Kwikie plugs come with a 1/2" rope tie for sealing and securing excess rope within the conduit system for future use. For over 25 years Cal Am has been providing the Power and Telecommunications industry with the highest quality conduit fittings and supports. Cal Am 5120-07 Blank Duct Plug, Loop Nut, 0.75" 20Mm Product # 5120-07 Jackmoon Cross Reference # Jm-Bla-07D100U Size Each 0.75" (20 Mm) Case Qty. 50 Uom Case Conduit I.D. 0.766"-1.020" (19.46-25.91 Mm) Three Styles Of Conduit Duct Plugs To Effectively Seal A Variety Of Empty Conduits Kwikie Blank Duct Plugs Are Manufactured From A Combination Of High-Impact Plastic Components And Pliable, Yet Durable, Gaskets. These Mechanical Duct Plugs Prevent The Incursion Of Water And Sedimentation Into Costly Duct Banks And Raceway Systems While Also Confining Potential Problems Like Dangerous Vapors To Their Source. Each Blank Plug Features A Rope-Tie To Secure Pull-Rope To The Plug S Back-Compression Plate. By Attaching The Rope To The Back-Compression Plate, Excess Slack Is Readily At-Hand For Future Use. Easily Installed, Or Removed, They Provide A Simple And Highly Effective Sealing Solution. Many Of Our Sizes Are Jackmoon Certified Cross-Referenced For A Seamless Part Number Conversion. Key Features All Plastic Construction - Corrosion Proof Water And Air Resistant Simple Installation Ideal For Manholes And Building Entrances